Brother GTX-4 - Too Much Luster; Too Fuzzy; Background White Ink Spreads Out When Printed with [Color+White Ink]

6-52
Disassembly / Replacement / Adjustment
(4) Remove the three screws fixing the cover L to detach it.
(5) Remove the three screws fixing the cover DBL to detach it.
(6) Detach the color and white flashing boxes.
(7) Wipe away ink waste under the flashing boxes if left.
(8) Disconnect the connector from the remaining level sensor located at the rear of the cleaning solution tank.
8
6
7
Cover L
Cover DBL
5
3
Cover L
3
4