Brother GTX-4 - Page 248

6-57
Disassembly / Replacement / Adjustment
(6) Take out the wiper cleaner from its packing bag, and remove it from its protector.
<IMPORTANT>
 As soon as it is unpacked, do not leave it as it is and put it in position.
X012
8
(7) Insert a new wiper cleaner into the printer from above, tip it leftward and put it in place.
<TIPS>
 First, insert the shaft from above. Then fold it to the left, press the area with the PUSH indication until a clicking sound is
heard, and get the latch into position.
X0056
(8) Close the front cover.
(9) Turn on the power.
<NOTE>
 Dispose of any waste resulting from the replacement in accordance with applicable laws and ordinances.
<TIPS>
 The head cleaning will be performed to prevent ink from drying up.
Wiper cleaner
Shaft
Latch
Wiper cleaner
Protector
Latch
Shaft