Brother GTX-4 - Page 280

6-89
Disassembly / Replacement / Adjustment
(24) If there is a spout spring, remove the spout spring by releasing the latch and sliding the spout spring in the
arrow-pointed direction.
<TIPS>
 The spout spring can be reused.
Assembly
(1) To perform the assembly, take the reverse procedures to disassembly operation.
<CAUTION>
 The tube, comprised of several parts, is required to be assembled.
(2) Insert the needle tube assy into the solenoid valve.
<CAUTION>
 Insert the tube fully up to its base while taking care not to bend it.
<TIPS>
 Apply maintenance solution or cleaning solution to the tube before insertion.
Insert the tube up to its base.
Latch