Brother GTX-4 - Page 296

6-105
Disassembly / Replacement / Adjustment
(4) Pinch the latch at the front end of ink pouch, and draw out the white ink pouch from the cartridge.
<CAUTION>
 Remove the accumulated ink at the tip of the cartridge with a waste cloth (non-fuzzy cloth). Clean the printer on a regular
basis.
X011
9
(5)
Put the capping pouch in the cartridge.
Push the tip end of capping pouch into the cartridge until it clicks into place.
Straighten the capping pouch in such a manner that it will be aligned with the gutter of lid of cartridge, and mount in position by
pulling it with your hand.
<NOTE>
 If the edge of the ink pouch is bent or undulating significantly, make it straight with your hand.
X004
9
Capping pouch
Cartridge
White ink pouch
Cartridge
Cartridge's tip end
Latch
Stretch