6-182
Disassembly / Replacement / Adjustment
(15) Unhook the latch of the FFC clamp on the carriage circuit board bracket to disconnect the FFC.
(16) Remove the five screws fixing the carriage circuit board to detach it.
(17) Disconnect the carriage circuit board's FFCs from the two bushings on the right rear inside the main unit to detach
the circuit board.
(18) Disconnect the FFC from the two FFC support units and FFC sleeve to take out the carriage board.
FFC support
FFC sleeve
17
16
15
To Next Page
Loading...
