8-3
Error code list
Error Error message Description Remedy
1095
[Wiper Cleaner Replacing
Color]
The time for replacement of
(color) wiper cleaner has
come.
Use the "Maintenance Part Clean/Replace" menu
to replace the wiper cleaner on the color side.
1096
[Wiper Cleaner Replacing
Color]
Due to the time for
replacement of (color) wiper
cleaner, it needs to be
immediately replaced.
1100
[Pump Tube To Be
Replaced]
The time for replacement of
the pump tube of the
maintenance unit has come.
Replace the maintenance pump.
1125
[Install White Ink After
Cleaning]
In the process of cleaning the
white head or immediately
after cleaning it, the head and
tube are not filled with white
ink.
After cleaning the head, perform the ink installation
menu to complete the operation.
1202
[Remove the White Ink
Cartridge and shake it]
To prevent the white ink within
its cartridge from precipitating,
it needs to be stirred.
After shaking the white ink cartridge to stir the ink,
follow the on-screen instructions to proceed with
the operation.
1210 [Exhaust Fan Stop]
Fan lock signal sent by the
hardware is detected.
Items to be checked:
(1) Check to see if the fan is locked due to foreign
matter contamination such as mist.
(2) Restart the GTX and check the fan rotation and
the presence of the related errors.
Electric components as candidate for replacement:
Fan, Fan harness, and Main circuit board
1401
After replacing the filter,
perform the ink
installation.
In the process of cleaning the
filter or immediately after
cleaning it, the tube is not
filled with ink.
Follow the on-screen instructions to complete the
[Load ink after replacing filter].
1501
[Fan Filter To Be
Replaced]
The time for replacement of
fan filter has come.
Use the "Maintenance Part Clean/Replace" menu
to replace the fan filter.
1601
[Flushing Foam
Replacing White]
The time for replacement of
(white) flushing foam has
come.
Use the "Maintenance Part Clean/Replace" menu
to replace the flushing foam on the white side.
1602
[Flushing Foam
Replacing White]
At the time for replacement of
(white) flushing foam, it needs
to be immediately replaced.
1605
[Flushing Foam
Replacing Color]
The time for replacement of
(color) flushing foam has
come.
Use the "Maintenance Part Clean/Replace" menu
to replace the flushing foam on the color side.
1606
[Flushing Foam
Replacing Color]
At the time for replacement of
(color) flushing foam, it needs
to be immediately replaced.
To Next Page
Loading...
