Brother GTX-4 - Page 427

8-10
Error code list
Error Error message Description Remedy
2204
[Maintenance Pouch Set
White12]
In a scene where an ink
pouch is needed, a
maintenance solution pouch
is set to the white 12
cartridge.
Set an ink pouch to the white 12 cartridge.
Check to see if the same phenomenon occurs
even when using a different white ink pouch.
2205
[Maintenance Pouch Set
White34]
In a scene where an ink
pouch is needed, a
maintenance solution pouch
is set to the white 34
cartridge.
Set an ink pouch to the white 34 cartridge.
Check to see if the same phenomenon occurs
even when using a different white ink pouch.
2214 [Ink Pouch Set White12]
In a scene where a
maintenance solution pouch
is needed, an ink pouch is set
to the white 12 cartridge.
Set the maintenance solution pouch to the white
12 cartridge.
Check to see if the same phenomenon occurs
even when using a different white maintenance
solution pouch.
2215 [Ink Pouch Set White34]
In a scene where a
maintenance solution pouch
is needed, an ink pouch is set
to the white 34 cartridge.
Set the maintenance solution pouch to the white
34 cartridge.
Check to see if the same phenomenon occurs
even when using a different white maintenance
solution pouch.
2300
[special operational
mode]
In the [Setting special work
mode] menu within the
Advanced menu, the mode
remains to be set to the
special work mode.
In the [Setting special work mode] menu within the
Advanced menu, release the special work mode.
2310
[Perform test print (for
white and color) to check
ink discharge from head]
When cleaning or
replacement of maintenance
parts is performed, make sure
to perform test print to check if
the ink is properly discharged
from the head.
Perform test print to check ink charge by following
the on-screen instructions.
2320
[Perform test print (for
white and color) to check
ink discharge from head]
Operation(s) liable to affect
the ink discharge from the
head is/are performed.
Perform test print to check ink charge by following
the on-screen instructions.
3000
[PC Communication
Error]
The communication data
being sent from the PC to the
GTX is interrupted during the
transmission.
(1) Check to see if the USB/LAN cable is properly
connected between the PC and the GTX.
(2) Check to see if the tools and application
software used in the PC are properly activated and
operated.
(3) Reactivate both the PC and GTX to redo the
operation.