8-27
Error code list
Error Error message Description Remedy
5431 [Machine Error]
It is a wiper cleaner drive error
caused by the maintenance
unit (white).
Items to be checked:
(1) Check to see if there are strong
noise-generating object(s) in the surroundings.
(2) Reactivate the GTX to check to see if such
error occurs.
(3) Check to see if the wiper cleaner motor rotates
when such error occurs.
(4) Check to see if any grease, ink, cleaning
solution, etc. adhere to the peripheral of the
maintenance C cleaner sensor assy.
(5) Check to see if any ink, cleaning solution, etc.
adhere to the maintenance circuit board.
Electric components as candidate for replacement:
Maintenance pulse motor, Maintenance C cleaner
sensor assy, and Maintenance circuit board
5432 [Machine Error]
It is a wiper cleaner drive error
caused by the maintenance
unit (white).
Items to be checked:
(1) Check to see if there are strong
noise-generating object(s) in the surroundings.
(2) Reactivate the GTX to check to see if such
error occurs.
(3) Check to see if any grease, ink, cleaning
solution, etc. adhere to the peripheral of the
maintenance C cleaner sensor assy.
(4) Check to see if any ink, cleaning solution, etc.
adhere to the maintenance circuit board.
Electric components as candidate for replacement:
Maintenance C cleaner sensor assy, and
Maintenance circuit board
5433 [Machine Error]
It is a wiper cleaner drive error
caused by the maintenance
unit (white).
5440 [Machine Error]
It is an internal error related to
wiper control occurred in the
maintenance unit (white).
(1) After reactivating the GTX, wait and see the
situation if it operates without any error.
(2) There is a possibility that this error occurred
collaterally after any other error had occurred.
Acquire the log file and use the GTX4 Service Tool
(View the DataLog -> Check Operation) to check
to see if another error occurs before or after this
error log.
To Next Page
Loading...
