8-36
Error code list
Error Error message Description Remedy
6130 [Machine Error Adjust CR]
It is an error of decrease in
carriage speed.
Clean the ink mist adhered inside the printer
(carriage roller, roller guide, and carriage guide
shaft).
Clean the carriage belt and pulley.
Clean the encoder strip.
Adjust the CR speed on the menu again.
Check the connectors of the head and carriage
circuit board.
Replace the carriage motor.
Replace the encoder strip.
Replace the encoder circuit board.
Replace the carriage circuit board.
Replace the main circuit board.
6131 [Machine Error Adjust CR]
It is an error of excessive
increase in carriage speed.
6132 [Machine Error Adjust CR]
It is an error of adjustment in
carriage stop.
Clean the ink mist adhered inside the printer
(carriage roller, roller guide, and carriage guide
shaft).
Clean the carriage belt and pulley.
Clean the encoder strip.
Adjust the CR speed on the menu again.
Check to see if the carriage locker rotates the
maintenance cam to move up and down.
Replace the carriage motor.
Replace the encoder strip.
Replace the encoder circuit board.
Replace the carriage circuit board.
Replace the main circuit board.
6133 [Machine Error]
It is an error of adjustment in
carriage speed (Reverse).
Clean the ink mist adhered inside the printer
(carriage roller, roller guide, and carriage guide
shaft).
Clean the carriage belt and pulley.
Clean the encoder strip.
Adjust the CR speed on the menu again.
Replace the carriage motor.
Replace the encoder strip.
Replace the encoder circuit board.
Replace the carriage circuit board.
Replace the main circuit board.
6134 [Machine Error]
It is an error of adjustment in
carriage speed (Forward).
6220 [Machine Error]
The color heads' temperature
level is abnormal.
Items to be checked:
(1) Check the connection of the head connector.
(2) After making the color/white head connection
crossed, reactivate the device and replace the
head if the error 6221 appears.
Electric components as candidate for replacement:
Carriage circuit board and Main circuit board
To Next Page
Loading...
