2-22
Installation and preparation
(16) As required, select the [Set as the default printer], and click [Finish].
(17) This completes the setup for the LAN connection method for the PC. Follow the table below to adjust the printer.
Menu name Things to prepare Document
1 [CR Speed Adjustment] ―
2-5-1. CR (Carriage) speed
adjustment
2 [V-rating's settings:] ― 2-5-2. V-rating setting
3 [Firing Adjustment]
Black paper or transparent sheet
(such as OHP sheet)
White paper
2-5-3. Firing adjustment
4 [Platen-Rolling Adjustment] White paper 2-5-4. Platen feed adjustment
5 [White/Color Alignment]
Pretreated
black or dark color T-shirt
2-5-5. White/color alignment
6
[Setting of the time displayed
on the nozzle check pattern]
―
2-5-6. Setting of the time displayed on
the nozzle check pattern
To Next Page
Loading...
