6 - 18 SETUP SEND
Memory Security
Memory Security lets you prevent unauthorized access to the MFC.
You will not be able to continue to schedule Delayed Faxes or Polling
jobs. However, any pre-scheduled Delayed Faxes will be sent when
you turn Memory Security
On
, so they will not be lost.
If you have selected Fax Forwarding, Paging or Fax Storage (
Menu
,
2
,
5
) before you turn Memory Security
On
, then Fax Forwarding or
Remote Retrieval will continue to work.
While Memory Security is
On
the following operations are available:
■
Receiving faxes into memory (limited by memory capacity)
■
Fax Forwarding
■
Remote Retrieval
While Memory Security is
On
the following operations are NOT
available:
■
Sending faxes
■
Printing received faxes
■
Copy
■
PC printing
■
PC scanning
Setting up the password
1
Press
Menu
,
2
,
0
,
1
.
2
Enter a 4-digit number for the
password.
Press
Set
.
If you are entering the password for the first time, the LCD
shows
Verify
.
3
Re-enter the password.
Press
Set
.
To print the faxes in memory, turn Memory Security
Off
.
If you forget the Memory Security password, please call Brother
Customer Service. (See For Customer Service on page i.)
To change a registered password, select
Set Password
after
Step 1, enter the old password, and then go to Step 2.
Miscellaneous
1.Mem Security
To Next Page
Loading...
Need help?
General
Weight and Dimensions
