GETTING STARTED 4 - 11
Toner Save
You can conserve toner using this feature. When you set Toner Save
to
On
, print appears somewhat lighter. The default setting is
Off
.
1
Press
Menu
,
1
,
6
,
1
.
2
Press or to select
On
(or
Off
).
3
Press
Set
.
4
Press
Stop/Exit
.
Sleep Time
Setting the Sleep Time reduces power consumption by turning off
the fuser inside the MFC, while it is idle. You can choose how long
the MFC is idle (from 00 to 99 minutes) before it goes into sleep
mode. The timer is automatically reset when the MFC receives a Fax
or PC data, or makes a copy. The default setting is 05 minutes. While
the MFC is in sleep mode, you will see
Sleep
on the LCD. If you try
to print or copy in sleep mode, there will be a short delay while the
fuser warms up to working temperature.
1
Press
Menu
,
1
,
6
,
2
.
2
Use the dial pad to enter the length of time the MFC is idle
before it goes into sleep mode (00 to 99).
3
Press
Set
.
4
Press
Stop/Exit
.
■
If you want to turn sleep mode off, press
Secure
and
Job Cancel
simultaneously and or to select
Off
in Step 2.
■
If the MFC is in Sleep Mode when you change the Sleep
Time, the new setting will take effect the next time the MFC
copies, prints or is restarted.
Ecology
1.Toner Save
To Next Page
Loading...
Need help?
General
Weight and Dimensions
