8 - 4 REMOTE FAX OPTIONS
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is an inactive code (--- ).
1
Press
Menu
,
2
,
5
,
2
.
2
Enter a three-digit code using
numbers
0
-
9
, or
#
.
Press
Set
. (The preset ‘ ’ cannot be changed.)
3
Press
Stop/Exit
.
Do not use the same digits that appear in your Fax Receive
Code (
51
) or Telephone Answer Code (
# 51
). (See Operation
from extension telephones on page 5-7.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Clear/Back
in
Step 2 to restore the inactive setting (--- ).
Remote Fax opt
2.Remote Access
To Next Page
Loading...
Need help?
General
Weight and Dimensions
