9 - 2 PRINTING REPORTS
Setting the Fax Activity Report Interval
You can set the MFC to print the Fax Activity report at specific
intervals (every 50 faxes, 6, 12 or 24 hours, 2 or 7 days). If you set
the interval to
Off
, you can print the report by following the Steps on
the next page.
The default setting is
Every 50 Faxes
.
1
Press
Menu
,
2
,
4
,
2
.
2
Press or to choose an
interval. Press
Set
.
(If you choose 7 days, the LCD will
ask you to choose a day on which to
begin the 7-day countdown.)
3
Enter the time to begin printing in 24-hour format.
Press
Set
.
(For example: enter 19:45 for 7:45 PM.)
4
Press
Stop/Exit
.
F
If you select 6, 12, 24 hours, 2 or 7 days, the MFC will print the
report at the selected time and then erase all jobs from its
memory. If the MFC’s memory becomes full with 200 jobs
before the time you selected has passed, the MFC will print the
Fax Activity Report early and then erase all jobs from memory.
If you want an extra report before it is due to print, you can print
it without erasing the jobs from memory.
If you select
Every 50 Faxes
, the MFC will print the Fax
Activity Report when the MFC has stored 50 jobs.
Setup Reports
2.Act.Interval
Act.Interval
Every 50 Faxes
To Next Page
Loading...
Need help?
General
Weight and Dimensions
