SETUP RECEIVE 5 - 4
Easy Receive
When you use this feature, you do not have to press
Start
or the Fax
Receive Code
5 1
when you answer a fax call and hear calling
beeps. Just hold the handset and wait a few seconds. When you see
Receiving
on the LCD or when you hear “chirps” through the
handset of an extension phone connected to another wall jack, just
replace the handset. Your MFC does the rest. Selecting
On
allows
the MFC to receive fax calls automatically, even if you lift the handset
of an extension or external phone. Selecting
Semi
lets the MFC
receive the call only if you have answered it at the MFC. Selecting
Off
means you will have to activate the MFC yourself, by pressing
Start
or by pressing
5 1
if you are not at your MFC.
(See
Operation from extension telephones
on page 5-7 and
For
Fax/Tel mode only on page 5-7.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu
,
2
,
1
,
3
.
3
Use or to select
On
,
Semi
,
or
Off
.
Press
Set
.
4
Press
Stop/Exit
.
If you have set the feature to
On
, but your MFC does not
automatically connect a fax call when you lift an external or
extension phone handset, press the Fax Receive code
5 1
.
At the MFC, lift the handset and then press
Start
.
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set Easy Receive to
Off
.
Setup Receive
3.Easy Receive
To Next Page
Loading...
Need help?
General
Weight and Dimensions
