5 - 9 SETUP RECEIVE
Polling
Polling is the process of retrieving faxes from another fax machine.
You can use your MFC to ‘poll’ other machines, or you can have
someone poll your MFC.
Everyone who is involved in Polling needs to set up their fax
machines for Polling. When someone polls your MFC to receive a
fax, they pay for the call. If you poll someone’s fax machine to receive
a fax, you pay for the call.
Setting up Polling Receive
Polling Receive is when you call another fax machine to receive a fax
from it.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu
,
2
,
1
,
7
.
3
Press or to select
On
(or
Off
).
Press
Set
.
4
Enter the fax number you are polling.
5
Press
Start
.
The LCD shows
Dialing
.
Setting up Sequential Polling Receive
Your MFC can ask for faxes from several fax units in a single
operation (Sequential Polling Receive). Afterwards, a Sequential
Polling Report will be printed.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu
,
2
,
1
,
7
.
3
Press or to select
On
(or
Off
).
Press
Set
.
4
Enter the fax machines you want to poll using One-Touch,
Speed-Dial, a Group or the dial pad. You must press
Set
between each fax number.
5
Press
Start
. Your MFC will poll each number or Group number
in turn to receive a fax.
Some fax machines do not respond to the Polling feature.
Setup Receive
7.Polling RX
Setup Receive
7.Polling RX
To Next Page
Loading...
Need help?
General
Weight and Dimensions
