Brother MFC-8220 - Changing One-Touch and Speed-Dial Numbers

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 4
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
Press
1
to change the stored
number.
—OR—
Press
2
to exit without making a change.
2
Enter a new number.
Press
Set
.
■
To erase the whole number or whole name, press
Clear/Back
repeatedly until all digits or letters are deleted.
To erase one digit or letter, use or to position the
cursor under it, and then press
Clear/Back
.
■
If you want to insert characters, use or to position the
cursor where you want to insert them, and then type.
3
Follow the directions beginning at Step 6 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See
Storing
One-Touch Dial numbers
on page 7-1 and
Storing Speed-Dial
numbers on page 7-3.)
#005:MIKE
1.Change 2.Exit