10 - 3 MAKING COPIES
Out of Memory message
If the memory becomes full while you are
making copies, the LCD message will
guide you through the next step.
If the
Out of Memory
message appears, press
Stop/Exit
to
cancel or
Start
to copy scanned pages. You will need to clear some
jobs from the memory before you can continue.
When you get an
Out of Memory
message, you may be able to
make copies if you first print incoming faxes in the memory to restore
the memory to 100%.
To gain extra memory, you can turn off Fax Storage.
(See Setting Fax Storage on page 8-3.)
—OR—
Print the faxes that are in the memory. (See
Printing a fax from
the memory on page 5-5.)
Then if this error message appears more than once you may
wish to consider increasing the memory size. For more
information on how to increase the memory size, see Memory
board on page 13-1.
Out of Memory
To Next Page
Loading...
Need help?
General
Weight and Dimensions
