8 - 6 REMOTE FAX OPTIONS
Remote commands
Follow the commands below to access features when you are away
from the MFC. When you call the MFC and enter your Remote
Access Code (3 digits followed by ), the system will give two short
beeps and you must enter a remote command.
Remote commands Operation details
95 Change the Fax
Forwarding, Paging or Fax
Storage settings
1 Off You can select
Off
after you have retrieved
or erased all your messages.
2 Fax Forwarding If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because the conditions
have not been met (for example, registering a
fax forwarding or paging number). You can
register your Fax Forwarding number by
entering 4. (See Changing your Fax
Forwarding number on page 8-8.) Once you
have registered the number, Fax Forwarding,
will work.
You can select
Off
after you have retrieved
or erased all your messages.
3 Paging
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to
receive stored fax messages. (See Retrieving
fax messages on page 8-8.)
3 Erase faxes from the
memory
If you hear one long beep, you can erase fax
messages from the memory.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
