5 - 3 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you will need to decide how
long the MFC will signal you with its special pseudo/double-ring
when you have a voice call. (If it’s a fax call, the MFC prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the MFC rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any extension phone on the same line as
the MFC. (See
Operation from extension telephones
on page 5-7.)
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu
,
2
,
1
,
2
.
3
Press or to select how
long the MFC will ring to alert you
that you have a voice call (for 20, 30, 40 or 70 seconds).
Press
Set
.
4
Press
Stop/Exit
.
Even if the caller hangs up during the pseudo/double-ringing,
the MFC will continue to ring for the set time.
Setup Receive
2.F/T Ring Time
To Next Page
Loading...
Need help?
General
Weight and Dimensions
