AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 2
3
Press or to select
Fax/Tel
(or
E-Address
).
Press
Set
.
4
Enter the phone or fax number (up to 20 digits).
Press
Set
.
—OR—
If you purchased the optional NC-9100h, you can select
E-Address
in Step 3 and then press
Set
.
■
If you want to enter a pause in the dialing sequence (for example,
to access an outside line), press
Redial/Pause
as you are
entering the digits.
Each key press of
Redial/Pause
enters a 3.5 second pause
when the number is dialed, displayed by a dash on the screen.
5
Use the dial pad to enter the name (up to 15 characters).
Press
Set
.
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press
Set
to store the number without a name.
6
Go to Step 2 to store another One-Touch number.
—OR—
Press
Stop/Exit
.
When you dial an auto dial number, the LCD shows the name
and number you have stored, or, if you have not stored a name,
only the number you have stored.
One-Touch Dial
Fax/Tel
To Next Page
Loading...
