G - 5 GLOSSARY
Ring Delay The number of rings before the MFC answers in Fax
mode.
Ring Volume Volume setting for the MFC’s ring.
Scanning The process of sending an electronic image of a paper
original document into your computer.
Speed-Dial A pre-programmed number for easy dialing. You must
press the
Search/Speed Dial
key and then
#
, and the three digit
code to start the dialing process.
Standard resolution 203 x 98 dpi. It is used for regular size text
and quickest transmission.
Station ID The stored information that appears on the top of faxed
pages. It includes the sender’s name and fax number.
Super fine resolution 203 x 392 dpi. Best for very small print and
line art.
TAD (telephone answering device) You can connect an external
TAD to the EXT. jack of your MFC.
Telephone Answer Code (Fax/Tel mode) When the MFC
answers a voice call, it pseudo/double-rings. You can pick up at
an extension phone by pressing this code (
# 51
).
Temporary Settings You can select certain options for each fax
transmission and copy without changing the default settings.
Tone A form of dialing on the telephone line used for Touch Tone
telephones.
Toner cartridge An accessory that holds toner for the drum unit on
Brother laser models.
Toner Save A process that causes less toner to be affixed to the
page to extend the life of the toner assembly. This will make the
receiving document significantly lighter.
Transmission The process of sending faxes over the phone lines
from your MFC to the receiving fax machine.
Transmission Verification Report A listing for each transmission,
that shows its date, time and number.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
