Brother MFC-8220 User Manual

INTRODUCTION 1 - 8
Red
Service error Follow the steps below.
1. Turn off the power switch.
2. Wait a few seconds, and then turn it
back on and try to print again.
If you cannot clear the error and still see
the Red back light color after turning the
MFC back on, please call Brother
Customer Service at: 1-800-284-4329
(in USA) or 1-877-BROTHER (in
Canada).
Cover open The cover is open. Close the cover. (See
Error messages on page 12-1.)
Toner empty Replace the toner cartridge with a new
one. (See Replacing the toner cartridge
on page 12-25.)
Paper error Put paper in the tray or clear the paper
jam. Check the LCD message. (See
Troubleshooting on page 12-1.)
Out of memory Memory is full. (See Error messages on
page 12-1.)
Other errors Check the LCD message. (See
Troubleshooting on page 12-1.)
LCD MFC status Description

Brother MFC-8220 Specifications

General

Type	all in one
Tray Capacity	250
Automatic Document Feeder Capacity	30 sheets
Paper Size	letter, legal, a4, b5, a5, b6, a6, exe
Paper Handling	up to 250 sheets
Mono Print Speed	21 pages per minute
Print Resolution Mono	up to 2400 x 600
Maximum Number of Pages Per Month	up to 20, 000
Scanner Type	sheetfed
Scan Resolution	up to 300 x 600
Copier Resolution Mono	up to 600
Fax Function	yes
Cartridges	n/a
Number Of Cartridges	2
Internal Memory	yes
Network	not applicable
Connectivity	parallel, usb 2.0
OS Compatibility	pc: windows 95, 98, 98se, me, nt workstation 4.0, 2000 professional or xp, mac: os 8.6 to 9.2, os x 10.1, 10.2.1 to 10.3 or later, available usb 2.0 or parallel port
Mobile Devices Connection	no

Weight and Dimensions

Height	13.2 inches
Width	17 inches
Net Weight	25.6 pounds