Brother MFC-9125CN - Page 359

5-132
Confidential
(10) Release the four Hooks to remove the Earth spring L from the LED ASSY.
(11) Release the Hook to remove the Earth spring R from the LED ASSY.
Fig. 5-150-4
Fig. 5-150-5
Assembling Note:
Check the points shown in the figure below.
Earth spring L
LED ASSY
Earth spring R
LED ASSY
Hole
Earth spring R
LED ASSY Hook
Hook
Hook
Earth spring R
Earth spring L
Earth spring L
LED ASSY
Plate
Earth spring L
Earth spring R
The Earth spring L must not
ride on the LED ASSY.
The Earth spring R must be engaged
with the groove of the LED ASSY.
The Earth spring L must be hooked
on the notch of the Plate.