Brother MFC-9125CN - Page 575

App.1-42
Confidential
■ WSW49 (End-of-copying beep and print in black)
- Selectors 4 and 5: Command flag detection time
After receiving a command flag, the machine will wait for the command that should follow for the
time length specified by these selectors.
■ WSW50 (SDAA settings)
Selector No. Function Setting and Specifications
1
2
RAM disc size in PCL/ PS
(Not used.)
3 End-of-copying beep
0: Yes
1: No
4
5
Command flag detection time
No. 4 5
0 0: 150 ms
0 1: 350 ms
1 0: 550 ms
1 1: 750 ms
6
7
CCD unit warm-up time adjustment
(Not used.)
8 Print in black (Not used.)
Selector No. Function Setting and Specifications
1
2
Percentage voltage for interpreting
the external telephone as being
hooked up (based on the network's
standard voltage) (Not used.)
3
DC mask curve table to be applied
when the line is connected
(Not used.)
4
AC impedance to be applied when
the line is connected (Not used.)
5
6
Current control to be applied
immediately after connection of the
line (Not used.)
7
8
AC voltage threshold for detection of
ring (Not used.)