Brother MFC-9125CN - Page 576

App.1-43
Confidential
■ WSW51 (Function setting 17)
■ WSW52 (Function setting 18)
■ WSW53 (Function setting 19)
Selector No. Function Setting and Specifications
1
Output of communications error
report when transmission verification
report is disabled
0: Enable
1: Disable
2
CR motor torque variation reduction
control (Not used.)
3
4
Cordless handset microphone
volume (Not used.)
5
l
7
Main unit microphone level and echo
cancellation ON/OFF function
(Not used.)
8
Support between nearly empty
→ empty when main unit cover
opened after nearly empty
detected (Not used.)
Selector No. Function Setting and Specifications
1
l
3
Cordless handset microphone level
and echo cancellation ON/OFF
(Not used.)
4
l
6
External telephone pseudo ringing
signal frequency setting (Not used.)
7
Caller ID (number display) display
after the machine has returned to
TEL mode from FAX mode
(Not used.)
8
Dial display during transmission
(Not used.)
Selector No. Function Setting and Specifications
1
2
Not used.
3
4
Caller ID (number display) FSK
receiving timing delay setting
(Not used.)
5
6
Caller ID (number display)
instantaneous interrupt detection
time setting (Not used.)
7
CNG detection retry after invalid
CNG detected
0: Yes
1: No
8
Decompression of JPEG
compressed file (Not used.)