Brother MFC Series - EEPROM Dump Transfer; EEPROM Dump Transfer (Maintenance Mode 17) (for Fax Models Only)

5-22
Confidential
DCP-J172W
MFC-J200/J245/T800W
1.4.9 EEPROM Dump Transfer (Maintenance mode 17) (for Fax Models Only)
<Function>
The EEPROM dump function transfers the EEPROM settings made in the machine to
another machine as fax data.
<Operating Procedure>
(1) Let the end user make a call to the destination machine to which he/she should
transfer the EEPROM settings as fax data.
(2) If the line is connected, instruct the end user to:
1) Switch his/her machine to the end user-accessible maintenance mode.
2) Enter [1] and [7].
3) Enter [1].
Fax transmission begins.