Brother MFC Series - Recording Paper Jam; The Paper Width Sensor Could Not Detect the Leading Edge of Recording

2-37
Confidential
■ Error Code 82
Recording paper jam.
The Paper width sensor could not detect the leading edge of recording papers.
<User Check>
- Release the release lever in the inner part of the Paper tray and remove the jammed
recording paper.
- Check if the recording paper used is according to specifications.
- Check if dark recording paper is not used.
- Clean the Platen.
- Check if the Paper tray is loaded correctly into the machine.
- Check if the Jam clear cover is properly closed.
- Clean the Paper pull-in roller.
Paper Jam
LCD
Step Cause Solution
1 Foreign materials in the
recording paper feeding path
Remove foreign materials.
2 Paper feeding path parts out of
place
Reattach the paper feeding path parts.
3 Paper feed roller stained Clean the Paper feed roller.
4 Paper feed motor harness
connection failure
Reconnect the Paper feed motor harness.
5 Paper pull-in roller worn out Replace the Paper pull-in roller.
6 Paper feed roller defective Replace the Paper feed roller.
7 Paper feed motor defective Replace the Paper feed motor.
8 Paper width sensor defective Replace the Carriage PCB ASSY.
9 Main PCB defective Replace the Main PCB ASSY.