2-35
Confidential
â– Error Code 80
Recording paper size error. (During fax/list printing)
The Registration sensor and Paper width sensor detected a recording paper smaller than
the specified size.
<User Check>
- Check if the recording paper used is according to specifications.
- Check if dark recording paper is not used.
- Clean the Platen.
Wrong Paper
LCD
Step Cause Solution
1 Registration actuator caught in
the surrounding parts
Reattach the Registration actuator.
2 CR encoder strip stained Clean the CR encoder strip.
3 PF encoder disk stained Clean the PF encoder disk and Flushing guide.
(Refer to Chapter 3, Section 1)
4 CR encoder strip defective Replace the CR encoder strip.
5 PF encoder disk defective Replace the PF encoder disk.
6 Registration sensor defective Replace the Registration sensor PCB ASSY.
7 Paper width sensor defective Replace the Carriage PCB ASSY.
8 Carriage motor defective Replace the Carriage motor ASSY.
9 Paper feed motor defective Replace the Paper feed motor.
10 Main PCB defective Replace the Main PCB ASSY.
To Next Page
Loading...
Need help?
General