Brother MFC Series - Move of the Head;Carriage Unit to the Adjustment Position; Move of the Head;Carriage Unit to the Adjustment Position (Maintenance Mode 63)

5-36
Confidential
1.4.19 Move of the Head/Carriage Unit to the Adjustment Position (Maintenance mode 63)
<Function>
This function moves the Head/carriage unit to the adjustment position.
<Operating Procedure>
(1) Enter [6] and [3] in the initial stage of the maintenance mode.
The machine displays "SELECT 63?" on the LCD.
(2) Press [Mono Start].
The machine displays "START 63?" on the LCD.
(3) Enter [*].
The machine moves the Head/carriage unit to the adjustment position and displays
"HEAD ADJ" on the LCD.
(4) When finished making the change, press [Stop] or [X].
The Head/carriage unit returns to the home position and locks itself, then the machine
returns to the initial stage of the maintenance mode.