4-6
Confidential
1.4 EEPROM Parameter Initialization (Maintenance mode 01)
Refer to Chapter 5 "1.4.1 EEPROM Parameter Initialization (Maintenance mode 01, 91)"
for details on the execution.
1.5 Set the Serial Number (Maintenance mode 80)
Set the serial number, referring to Chapter 5 "1.4.29 Display of the Equipment's Log
(Maintenance mode 80)".
The serial number can also be set with the service setting tool (BrUsbSn.exe).
The serial number setting procedure is given below.
(1) Turn the machine on and switch it to the maintenance mode.
(2) Connect the machine to your PC using a USB cable.
(3) On the PC, run the service setting tool (BrUsbSn.exe) to display the following window.
(4) In Product Category, select [1. Ink-Model].
(5) Select [2013 Model_3] for Ink Cartridge Model or [2015 Model_1] for Ink Tank Model.
To Next Page
Loading...
Need help?
General