EasyManuals Logo
Home>Brother>Printer>MFC Series

Brother MFC Series User Manual

Brother MFC Series
309 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
5-53
Confidential
*1: The paper type is printed in the order, from left, of "Plain paper - Inkjet paper - Glossy paper".
*2: For details about the purge type, refer to maintenance mode 76.
*3: For details about sensors, refer to maintenance mode 32.
*4: Not required for servicing.
*5: 0: No ink cartridge loaded
1: High-yield ink cartridge
2: Standard-yield ink cartridge
*: Unidentifiable ink cartridge
*6: Excluding the resets triggered by the following
Maintenance codes 01 and 91
Maintenance code 80 (Resetting the purge and flushing counts)
*7: Not used
1 Real-time clock (RTC) check result *4 26 Printed page count for paper size and paper type *1
2 RTC backup check result *4
OK: Backup completed, NG: Backup failed
27 Total page count for duplex printing/Jam count in
duplex printing/Roller cleaning count *7
3 Model code 28 Total page count in duplex printing *7
4 Country code 29 Duplex printed page count for recording paper size
and type *7
5 Checksum of WSW, PSW, USW, and FSW *4 30 Total printed label count/Label jam count *7
6 Version of main firmware 31 Total print count in printing via manual feed slot/
Paper jam count *7
7 Version of boot firmware *4 32 CIS type (currently in use, parameters saved in
firmware)
8 Serial number 33 ADF scanning count/FB scanning count/ADF jam
count/
FAX scanning count/Scanner count
9 Head property information/Head voltage adjustment
value/Existence of mismatched calibration data in
head calibration data calibration ratio
34 Home positioning error code of the CIS unit/
Home positioning detection log data *4
10 CIS type/Engine type/LCD type 35 Purge count/Sensor purge count *7/
Wipe count/Black flushing count/Color flushing count/
Flushing count error detection count
12 Ink drop count after replacement of ink cartridge or
refill of ink
36 Purge count Automatic/manual (black) *2
13 Ink drop count after detection of "Ink Low" 37 Purge count Automatic/manual (color) *2
14 Ink drop count for droplets jetted out onto the platen
*4
38 Total power-ON time
15 Total ink drop count from a new head including
flushing
39 Power-ON count
16 Ink drop count via cleaning cycle after replacement of
ink cartridge or refill of ink
40 Machine error history
Error code: Date of occurrence: Machine temperature
degree-C at the time of occurrence
17 Ink cartridge change or ink refill count high-yield,
standard yield
41 Communications error history
(Error code: Date of occurrence)
18 Ink cartridge detection failure count (Cannot Detect
display count)
42 Initial purge log *4
(FF: Normal end)
19 Ink drop count after previous ink cartridge
replacement or ink refill
43 Machine information backup file version *4
20 Ink drop count after detection of "Ink Low" at the
previous replacement of ink cartridge or refill of ink
44 Sensor status *3
21 Ink drop count due to cleaning after previous ink
cartridge replacement or ink refill
45 Ink cartridge type loaded in each slot *5
Remaining ink (0: Normal, 1: Error)
22 Ink drop count at ink remaining failure 46 Executed maintenance codes *4
23 Total printed page count/Printed page count for
previous month/Printed paper jam count
47 Executed special maintenance codes *4
24 Printed page count for paper size 48 LCD error *4
25 Page count in by printing method 49 Reset count*6/Power-ON duration at the time of last
reset (Total power-ON hours)
50 Operation start date of the product
(Current date when the user operates the product first
after unpacking)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC Series and is the answer not in the manual?

Brother MFC Series Specifications

General IconGeneral
BrandBrother
ModelMFC Series
CategoryPrinter
LanguageEnglish

Related product manuals