Brother MFC Series User Manual

5-65
Confidential
AMS04 (Maintenance Assurance 2)
 Selector 3: Black ink print mode
If any color ink runs out, printing is no longer possible by default. Setting this selector
to "1" allows the machine to function as a monochrome printer, making it possible to
print with black ink only even in a "Replace Ink" state as listed below.
Tip Difference between selector 3 on AMS04 and selector 8 on WSW49 (For details,
refer to the "Worker Switches (WSW)" document separately issued.)
Both selector 3 on AMS04 and selector 8 on WSW49 specify the similar black ink print
mode that applies if any color ink runs out. The difference is that the former allows the
machine to print all data received as a monochrome printer with black ink only; the
latter to ignore the "Replace Ink" state, receive both color and black data, and print it,
resulting in a printout missing color components.
 Selectors 4 and 8: Automatic purging for color ink and for black ink
The machine periodically performs an automatic purge by default. The automatic
purge, however, wastes ink when no printing has occurred. To avoid it, disable the
automatic purge with these selectors. In the first printing after a long no-print period,
disabling it may lower the print quality.
Setting selector 4 or 8 to "1" disables the setting made by selectors 6 and 7.
Selector
No.
Function Setting and Specifications
1
2
Not used
3 Black ink print mode 0: Disable (default) 1: Enable
4 Automatic purging for color ink 0: Enable (default) 1: Disable
5 Not used
6
7
Periodical purging interval
No. 6 7
0 0 : Prescribed purge intervals default
0 1 : 30 days black, 60 days color
1 0 : 30 days black, no purge color
1 1 : No purge black and color
8 Automatic purging for black ink 0: Enable (default) 1: Disable
Printing FAX message
received
Monochrome printing only possible
Print from PC No printing possible
Copy
Monochrome printing only possible. The [Mono] key is
enabled, but the [Color] key is disabled.
Print a list Monochrome printing only possible
Purge operation
Purge operation possible for black ink only, not possible for
all-color or any specific color

Brother MFC Series Specifications

General

Brand	Brother
Model	MFC Series
Category	Printer
Language	English