PULSE Multi-analyzer System Type 3560-B/C/D/E – Installation and IDAe Hardware96
AO-0535-D-xxx Cable, 37-pole D-sub connector to 6 × microdot, PVC
insulated, 70°C (158°F)
xxx (length in decimetres) = 010, 070, 100, 130
AO-0536 Cable, 37-pin D-sub connector to 2 × 4-pin for triaxial
accelerometers, 10 m (33 ft.) 85°C (185°F)
AO-0562-D-xxx
AO-0562-M-yyy
6-channel IDA array cable, 37-pole D-sub Male to Lemo 1B
7-pin Male
xxx (length in decimetres) = 015, 100, 150, 300, 400
yyy (length in metres) = 300
AO-0594 Cable, 16 × BNC Female to 37-pin D-Sub
AO-0595 37-pin D-sub converter-cable for DATAQ DI 75B
AO-0602-D-xxx Adaptor cable, 37-pole D-Sub to 6 × 7-pole Lemo 1B
xxx (length in decimetres) = 005, 050
AO-0603-D-xxx Adaptor cable, 37-pole Sub-D to 6 × BNC socket
xxx (length in decimetres) = 005, 070
AO-1451 RS-232 Cable for PULSE Controller Module
AO-1472 Cable, 37-pin D-sub to AUX I/O
See “Cable AO-1472” on page 88 for pin designations
JJ-0081 BNC Adaptor, Female-Female
Part No. Description
To Next Page
Loading...
