BRUEL & KJAER PULSE 3560-C User Manual

CHAPTER 2
Installation and Configuration
31
The next page, PULSE Synchronization, is where the synchronization method to be used is
verified. The method is dependent on the LAN interface module’s synchronization restric-
tions and cable setup as described in section 2.7.1. The program detects the hardware type
and, based on the above prerequisites, displays the following options (Fig.2.24 – Fig.2.27):
Fig.2.24
AES/EBU method only
Fig.2.25
IDA BNT method only

BRUEL & KJAER PULSE 3560-C Specifications

General

Brand	BRUEL & KJAER
Model	PULSE 3560-C
Category	Measuring Instruments
Language	English