CryoProbe User Manual BRUKER 89 (107)
Related documents A
1000000
The following documents contain further information.
CryoProbe Site Planning Questionnaire
A questionnaire for potential CryoProbe customers about their NMR laboratory
and spectrometer. B
RUKER needs this information for tailoring the CryoProbe Sys-
tem to the customer’s needs and for preparing its installation.
CryoProbe System Site Planning Guide (P/N Z31524)
User guide for planning the installation of a CryoProbe System. It contains specifi-
cations, information about compatibility with existing magnets and spectrometers,
and site planning examples.
CryoProbe System Site Preparation Manual (P/N Z31553)
This manual accompanies the Site Preparation Set which is delivered before oth-
er devices are sent. After being installed by the customer, the set provides the in-
frastructure for the actual CryoPlatform.
CryoProbe data sheets
RF power limits, sample temperature range etc. specific for the actual CryoProbe.
CryoProbe System Installation Manual (P/N Z31555)
Installation and initial setup of a new or relocated CryoProbe System and its op-
tional devices.
He Compressor technical manual
The operation manual is delivered with the He Compressor.
CRP RF Electronics Technical Manual (P/N Z31474)
Describes the RF wiring between CryoProbe and spectrometer, explains how to
configure the HPPR CRP, lists technical data, and contains service information for
the preamplifier system.
To Next Page
Loading...
Need help?
General
