24 T401S Indicator User Instructions
Indicator applications
3.7 Remote Display application
This section applies if you have the Remote Display application active.
The indicator can be configured to work as a remote display with other compatible
indicators.
To use the indicator as a Remote display for a Primary indicator you must configure
settings in the Supervisor menu and in a separate password protected menu.
A remote indicator will display the same information as the primary indicator and
pressing the main function keys (Tare, Select, Zero, Print, and Units) on the remote will
function as if they were pressed on the primary indicator.
Contact your local representative for information on setting up the indicator as a
Remote or Primary indicator.
To Next Page
Loading...