BTEK T401S - Chapter 5 Communications; Default Print Formats

T401S Indicator User Instructions 35
5.1 Default print formats
5 Communications
The T401S can communicate through these ports:
l Serial
l Ethernet
5.1 Default print formats
Below are examples of the ten default formats that are available. The default unit of
measure may change based on your geography.
General Weighing (Format #1)
General Weighing (Format #2)
Default for Accumlator App.
Active Count (Format #3)
Default for Counting App.
Net weight only
General Weighing (Format #4)
Default for Checkweighing App.
Active displayed weight value
General Weighing (Format #5)
Default for Batching App.
Gross 272.04 lb
Tare 95.88 lb
Net 176.16 lb
Transaction Count: 10
Gross 272.04 lb
Tare 95.88 lb
Net 176.16 lb
Count 176
Net 176.16 lb
G 272.04 lb