BTEK T401S - Setpoint Configuration

40 T401S Indicator User Instructions
Supervisor menu
8.1 General Weighing application supervisor menu
Figure 8.1 shows the Supervisor menu when you are in the General Weighing
application.
Figure 8.1 Supervisor menu for the General Weighing application
Follow these steps to set the items in the Supervisor menu.
The Setpoint menu is the same for all the applications so will only be explained once
here. Exceptions are noted in the text.
Super
Setpnt
Edit Print Reset
No Yes
Battery
Enable
Tmout
Off On
Port 1 Port 2
Out1 Out2 Out3
In1
In2
In3
None
Print
Units
Select Tar e Zero F1
Accu
PrntHld
User
Off On
Annun
Bold boxes and text
denote defaults.
1-3600
minutes
Key
in
value
Key
in
value
Key
in
value
SELECT =
TARE =
PRINT =
UNITS =
ZERO =
F1 = Escape or