BTEK T401S - Battery Settings

T401S Indicator User Instructions 43
8.1 General Weighing application supervisor menu
Print
Setpoint  Edit  Print
15. Press UNITS …
Print is displayed. Use this to print the settings under SEtPnt.
16. Press SELECT …
Port 1 is displayed.
17. Press F1 to abort the print process or press UNITS to scroll to the desired port
and press ZERO to print the information …
Print is displayed after either action.
Reset
Setpoint  Edit  Print  Reset
18. Press UNITS …
rESEt is displayed. Use this to reset the settings under Edit to factory
defaults.
19. Press SELECT …
no is displayed.
20. Press ZERO to abort the reset or press UNITS …
YES is displayed.
21. Press ZERO to reset the settings to factory defaults …
rESEt is displayed.
22. Press TARE …
SEtPnt is displayed.
8.1.2 Battery
Super  Setpoint  Battery
1. Press UNITS …
bAttErY is displayed. Use this to enable the battery and to set a timeout
length (in minutes). If this time expires with no scale or keypad activity
the indicator will automatically shut off.
The battery status and timeout features are for the internal battery option and do not
function with other battery sources.