Logamatic EMS RC35 user interface - Subject to technical modifications. 11
Installation
3
3.1.2 Installation on boiler
The unit can be installed directly on boilers equipped with EMS.
3.2 Types of installation
The user interface can be installed in three different ways:
• As the only user interface in the system (factory setting): the RC35 user interface is mounted in
a room in the home (the reference room) or on the boiler.
Example: single-family house with one heating zone.
• As the only user interface in a heating system with two or more heating zones (Æ Fig. 2).
Examples: radiant floor heating on one story, radiators in the other.
Fig. 2 Options for a heating system with two heating zones
HZ1
HZ2
To Next Page
Loading...
