Buderus Logamatic EMS User Manual

Commissioning
Logamatic EMS RC35 user interface - Subject to technical modifications.18
5
5 Commissioning
5.1 General commissioning
Operation Result
1. Switch on the heating system.
While setting up the connection between the RC35 and EMS
the display shows the message on the right.
If the display shows a different message, look it up in
section 10, page 48.
2. Set the language:
Open the cover. Hold down the button and use the dial
to set the language.
3. Set the date and time:
Hold down the button and use the dial to set the values
that are flashing. Release the button.
Hold down the button and use the dial to set the values
that are flashing. Release the button.
In the event of a power failure, the date and time are retained
for up to 8 hours. All other settings are retained permanently.
4.
Simultaneously press the + + buttons to open
the SERVICE MENU.
Tab. 6 General commissioning
If necessary, you can change the contrast on the display:
B Hold down the and buttons and turn the dial at the same time.
RC35 version:
connect to:
connecting ...
please wait
Open cover to set
language using
OK key.
language set:
American
SET DATE
set year
01/01/2000
SERVICE MENU
B quick operation
settings
diagnosis
servicing

Buderus Logamatic EMS Specifications

General

Brand	Buderus
Model	Logamatic EMS
Category	Network Router
Language	English