WARNINGS!
• Use only cables, probes, chargers, and accessories specified for use with Butterfly iQ/ iQ+/ iQ3.
Substitution of non-approved accessories may cause the system to perform improperly or may
cause injury to the patient or operator.
• If the probe seems unusually hot, produces an odor or smoke, or leaks, stop use immediately.
Unplug the probe from the mobile device or disconnect it from the charger (if applicable).
Submit a ticket for support at: support.butterflynetwork.com.
• Any serious incident that occurs in relation to the device should be reported to the manufacturer
at http://support.butterflynetwork.com (and to the competent authority of the EU Member State
in which the incident occurred, if applicable): https://www.ema.europa.eu/en/partners-networks/
eu-partners/eu-member-states/national-competent-authorities-human.
• Do not use Butterfly iQ/ iQ+/ iQ3 in the presence of flammable gases or anesthetics. Doing so
can result in a possible fire or explosion.
• Butterfly iQ/ iQ+/ iQ3 has not been evaluated or approved for use in hazardous locations
as defined in the National Electric Code standard. In compliance with IEC classification, the
Butterfly iQ/ iQ+/ iQ3 is not to be used in the presence of flammable substances/air mixtures.
• Do not use the Butterfly iQ Application on a mobile device that does not meet minimum
requirements. Using the Butterfly iQ Application on a mobile device that does not meet
the minimum requirements may affect performance and image quality, possibly resulting in
misdiagnosis.
• Spilling fluids into the system may damage it or present a fire or shock hazard. Do not allow
fluids to enter the device or the charging system.
• Store only within the range of environmental conditions specified in the technical specifications.
• Dangerous high voltages and currents are present. There are no user-serviceable parts. Do not
open, remove covers, or attempt repair.
• Portable and mobile radio-frequency (RF) communications equipment can affect Medical
Electrical Equipment.
• Internet access is required to view the user manual and Butterfly support portal. If you intend to
use Butterfly iQ/ iQ+/ iQ3 without an internet connection download the user manual locally by
visiting support.butterflynetwork.com.
• Use of damaged equipment or accessories may cause the device to perform improperly and/or
result in injury to the patient or operator. Refer servicing to qualified service personnel.
• No modification is allowed. Do not modify cables, probes, chargers, or accessories specified
for use with Butterfly iQ/ iQ+/ iQ3. Modification to equipment may cause the system to perform
improperly or may cause injury to the patient or operator.
• When the probe is used in a home environment, the probe should be stored away to prevent
any harm from or to pets, pests, or children.
• When the probe is used in a home environment, it is imperative that the cord be properly
wrapped around the probe when not in use to avoid the potential for accidental strangulation.
Basic Safety/Usage Environment
Safety Information 12
To Next Page
