14. Using Butterfly iQ+ Bladder System
This chapter provides information regarding the Butterfly iQ+ Bladder system. This system provides healthcare
providers with a streamlined workflow for bladder scanning applications.
NOTES
• The Butterfly iQ+ Bladder system is not available in all countries.
• The Butterfly iQ+ Bladder experience requires a dedicated probe (the Butterfly iQ+ Bladder),
and it is not compatible with the Butterfly iQ/ iQ+/ iQ3.
• The Butterfly iQ+ Bladder system is only available on Apple iPads with a USB-C port. See here
for a full list of compatible devices.
• The Butterfly iQ+ Bladder system is limited in depth between 5 cm and 20 cm.
14.1. Overview
The Butterfly iQ+ Bladder requires a compatible device and compatible software. It is recommended to always
install the latest version of the app. The Butterfly iQ+ Bladder probe is a configuration of the Butterfly iQ+ hardware
platform, and thus shares its mechanical and electrical specifications.
NOTE
The Butterfly iQ+ Bladder does not require a login and does not save images as such no PHI/PII is
stored on the device when operating the Butterfly iQ+ Bladder system.
14.2. Indications for Use
The Butterfly IQ+ Bladder Ultrasound System is indicated for use by trained healthcare professionals in
environments where healthcare is provided to enable diagnostic ultrasound imaging for the measurement of fluid
volume of adult patient clinical application for urology.
The ultrasound mode of operation is B-Mode + Auto Bladder Volume [61].
The Butterfly Auto Bladder Volume Tool [61] is a software application package. It is designed to view, quantify
and report results acquired on Butterfly Network ultrasound systems for noninvasive volume measurements of the
bladder, to support physician diagnosis. Indicated for use in adult populations.
14.3. Contraindications
Not intended for fetal or pediatric use or for use on pregnant patients, patients with ascites, or patients with open
skin or wounds in the suprapubic region.
14.4. Acquiring a Bladder Volume
1. Make sure the probe is connected to a compatible iPad.
Using Butterfly iQ+ Bladder System
Using Butterfly iQ+ Bladder System 72
To Next Page
