1. After capturing an image or cine click on the in the top right corner of the scan screen.
2. Click on the image or clip that you wish to annotate.
3. Click "Edit".
4. Select "Label Capture".
5. Click "Aa" and either click a pre-defined label or type your own.
6. Move the label to the proper place on the image.
7. Click "Save"
7.2. Using Protocols
With the Butterfly Protocols, you can follow common exam types and easily label scans of the appropriate views.
The available protocols can be found with the relevant presets below:
• Lung Protocol:
• Lung Preset
• Pediatric Lung Preset
• Aorta Protocol
• Aorta & Gallbladder Preset
• Abdomen Preset
• Abdomen Deep Preset
• Cardiac Protocol
• Cardiac Preset
• Cardiac Deep Preset
• Pediatric Cardiac Preset
• eFAST Protocol
• FAST Preset
• Abdomen Preset
• Abdomen Deep Preset
• DVT Protocol
• Vascular Access: Deep Vein Preset
Adding Labels via Protocols
1. From the scan screen, select the appropriate preset.
2. Open the Actions menu
and press the desired protocol button. The view picker displaying the relevant
views for that protocol will appear on the screen.
3. Tap the view you would like to scan.
4. A label will automatically appear at the bottom of the scan screen for the view selected.
5. Capture either a cine or still image.
6. After image capture, the view picker will return. A checkmark indicates that the view has already been captured
and labeled.
7. Tap a view to continue labeling.
Using Protocols
Annotations 40
To Next Page
