NOTE
All protocol views are optional. You may select any view, including views you have already
acquired if you would like to capture multiple examples of that view.
Editing the Protocol View Label
1. Tap the view label to activate editing. A pencil will appear next to the label .
2. To move the view label, drag the label to the desired position while editing is active.
3. To change the view, tap the pencil
. The view picker will reappear and a new view can be selected.
Exiting the Protocol
You can exit the protocol in the following ways:
1. Tapping “Exit workflow” in the view picker
2. Changing the preset
3. Uploading a study
4. Tapping the X next to the Protocol button
NOTE
When you exit a protocol, the images captured using the protocol remain saved in the Exam Reel
for review and upload. However, the view picker progress will be reset.
Using Protocols
Annotations 41
To Next Page
