Butterfly Network iQ - Probe Battery Charger

NOTE
The Butterfly iQ3 includes a passive RFID chip intended for servicing and fleet management only.
3.2.3. Probe Battery Charger
Only use the charger supplied with the probe.
The following figure [23] shows the battery charging accessories.
Butterfly iQ/ iQ+ charger Butterfly iQ3 charger
Charging System Components.
Table 4. Charging System Components
Butterfly iQ/ iQ+
Butterfly iQ3
1. Charging Pad
2. Charging Cable
3. Wall Adaptor
1. Charging Contacts
2. Charging Cable
3. Wall Adaptor
NOTES
• The latest Butterfly iQ/ iQ+/ iQ3 charger has a matte black finish and curved probe cradle. If
you have a previous model please see Probe Battery Charger [93] for additional information on
charging your probe.
• The electronic interface/connection is not meant to control the operation of another medical
device or accessory.
System Components
System Overview 23