NOTE
This tutorial is not a substitute for professional clinician training and experience and may not
include all possible patient to patient variation. Clinicians are solely responsible for patient
care and for exercising their independent clinical judgment at all times.
6. On the results screen, tap finish to upload or go to exam reel to review the study
7. Optionally, tap restart to start over. Restarting will preserve your previous scan
To perform a vascular access scan - on iPad
1. Plug-in the probe
2. Tap on the “Vascular access” button if available
3. Optionally, enter patient details if available
4. Enable tools such as Needle Viz or Biplane from the Actions menu
Using Butterfly iQ+ Care
Using Butterfly iQ+ Care 71
To Next Page
