4.6.1 Mixing auger with cutting blades 41
4.7 Delivery area (delivery opening) 42
4.8 Conveyor belt (optional) 43
4.9 Cross conveyor belt (optional) 43
4.10 Counter-blades 44
4.11 Weighing scales (optional) 45
4.12 Hydraulic aggregate (optional) 45
4.12.1 Hydraulic aggregate 5.5 KW 45
4.12.2 Hydraulic aggregate 1.1 KW 46
4.12.3 Electrohydraulic control block 46
4.13 Hydraulic hand pump (optional) 46
4.14 Oil cooler (optional) 47
4.15 Control cabinet (optional) 48
4.15.1 “Basic” control 48
4.15.1.1 Control cabinet “basic” control overview 48
4.15.1.2 Main switch/emergency stop/off button “basic” control 49
4.15.1.3 Switching on the “basic” control system 49
4.15.1.4 Confirming error messages 49
4.15.1.5 Operating the “basic” control system 50
4.15.1.6 Service – error message readouts in “basic” control 51
4.15.2 „Plus“ control 52
4.15.2.1 Control cabinet “plus” control overview 52
4.15.2.2 Main switch/emergency stop/off button “plus” control 53
4.15.2.3 Switching on the “plus” control system 53
4.15.2.4 Confirming error messages 53
4.15.2.5 „Plus“ control manual operation 54
4.15.2.6 „Plus“ control automatic operation 55
4.15.2.6.1.1„Plus“ control automatic operation start screen 55
4.15.2.6.1.2Setting runtime in „Plus“ control automatic operation 55
4.15.2.6.1.3Error messages in “plus” control 56
4.15.2.6.1.4“Plus” control maintenance overview 56
4.15.2.6.1.5“Plus” control BvL service menu (password protected) 58
4.15.3 “Basic” and “Plus” remote control (optional) 60
4.15.3.1 Remote control functions 61
4.15.3.1.1 Linking switches and buttons to the transmitter 61
4.15.3.1.2 Meaning of the transmitter LEDs 62
4.15.3.2 Power on/activate transmitter 62
4.15.3.3 Remote control use 63
4.15.3.4 Remote control Off 63
4.15.3.5 Transmitter button lock 63
4.15.3.6 Transmitter battery change 64
4.16 Safety and protective equipment 65
4.16.1 Cover aprons 65
4.16.2 Block ball valve 66
4.16.3 Main drive shaft protective panels 66
4.16.4 Emergency stop button 66
5 Transport, setup and initial startup 67
5.1 Scope of delivery 67
5.2 Loading and unloading the machine with load hoists 68
5.3 Installing the machine 68
5.4 Electrical connection 69
5.5 Check the functioning of the machine 70
6 Operation and control 71
6.1 Switching on the machine 71
To Next Page
Loading...
