6.1.1 Powering up following emergency stop or malfunction 71
6.2 Beginning and concluding the mixing process 72
6.3 Load the mixing chamber 72
6.3.1 Recommended filling sequence 73
6.4 Output feed 74
6.4.1 Resolving blockages 76
7 Cleaning, maintenance and servicing 77
7.1 Cleaning 78
7.2 Lubrication 78
7.2.1 Lubricating points 79
7.3 Maintenance plan - overview 80
7.4 Replace transmission oil 81
7.4.1 Brevini ECS1512 transmission 82
7.4.2 Brevini EM1065 transmission 83
7.4.3 Comer PGA1602 transmission 84
7.4.4 BvL 108960 reduction gear (optional equipment) 85
7.5 Entry into the mixing chamber 86
7.5.1 Delivery opening with protruding cover apron 87
7.5.2 Delivery opening with closely-fitting cover apron (optional) 88
7.5.3 Delivery opening with closely-fitting cover apron and conveyor belt (optional) 89
7.6 Installation and positioning of the mixing augers 89
7.7 Mixing auger cutting blades 90
7.7.1 Sharpen cutting blades 90
7.7.2 Turn/replace the cutting blades 91
7.8 Hydraulic system 92
7.8.1 Hydraulic aggregate 5.5 KW (optional) 93
7.8.1.1 Hydraulic aggregate 5.5 KW maintenance plan 93
7.8.1.2 Monitor the oil level of hydraulic aggregate 5.5 KW 93
7.8.1.3 Replenish hydraulic oil hydraulic aggregate 5.5 KW 94
7.8.1.4 Hydraulic aggregate 5.5 KW oil change 94
7.8.2 Hydraulic aggregate 1.1 KW (optional) 95
7.8.2.1 Hydraulic aggregate 1.1 KW maintenance plan 95
7.8.2.2 Monitor the level of hydraulic oil hydraulic aggregate 1.1 KW 95
7.8.2.3 Replenish hydraulic oil Hydraulic aggregate 1.1 KW 96
7.8.2.4 Hydraulic aggregate 1.1 KW oil change 96
7.8.3 Hydraulic hand pump (optional) 97
7.8.3.1 Check the oil level of the hydraulic hand pump, refill and replace the oil 97
7.8.4 Hydraulic hose markings 98
7.8.5 Maintenance interval 98
7.8.6 Inspection criteria for hydraulic hose connections 98
7.8.7 Installation and removal of hydraulic hoses 99
7.9 Conveyor belt (optional) 99
7.9.1 Belt connection 100
7.9.2 Tensing/guiding the conveyor belt 100
7.10 Tightening torques for flange connections 101
8 Malfunctions 102
9 Appendix 103
9.1 Documentation supplied by third-party producers 103
9.2 Circuit diagrams 103
To Next Page
Loading...
